4everdeck site logo.
Contact
Exterior of a building with a wooden deck and ultra fascia boards, surrounded by potted plants and greenery

4 Everdeck® Ultra Fascia Boards

4 Everdeck® Ultra Fascia Boards finish exterior work with the kind of precision that makes edges disappear and lines read clean. Built from fourth-generation composite, each profile holds its colour and geometry through seasons of heat, rain, and daily use. The surface carries a subtle timber grain, so trims, bands, and returns sit comfortably alongside contemporary façades and adjacent decking without looking synthetic or out of place.
Use Ultra Fascia Boards wherever an installation needs a neat protective border: closing exposed deck perimeters, framing privacy screens, resolving gate edges, or running clean bands across façades.

Why Choose 4 Everdeck® Ultra Fascia Boards?

  • Low Maintenance: Timber trims look sharp on day one, then start asking for sanding, sealing, and repainting. Ultra Fascia cuts that cycle out completely. The composite surface doesn’t take up moisture, so edges don’t swell, coatings don’t peel, and colour doesn’t wash out after a season of sun and rain.
  • Two Profiles for the Right Job Choose Standard (10×70×2900 mm) for trims, bands, and smaller features where a slim detail completes the design. Step up to Wide (15×138×2900 mm) when you’re spanning taller areas or want fewer visible joins and a bolder, more architectural stripe.
  • Built for South African Weather: From coastal humidity to inland heat, Ultra Fascia stays true. The composite formulation resists UV fade, won’t rot, and remains dimensionally stable across daily temperature swings. That stability matters on long runs and exposed corners where timber tends to wave, cup, or split.
  • 20-Year Guarantee: Every board comes backed by a comprehensive 20-year guarantee, offering long-term confidence that your investment will withstand weather, wear, and the test of time.

Our Ultra Fascia Boards’ Colour & Style Options

Colour and profile do the quiet heavy lifting on this range. Pick the tone to set the mood (cool and crisp, warm and grounded, or deep and deliberate), then choose the profile to control proportion and sightlines. On sunny façades, consider how the shade reads in hard light and how it balances adjacent materials like plaster, stone, glass, or timber.
For small details (gates, trims, returns) a finer band keeps edges disciplined; on tall runs, a wider face reduces joins and gives the elevation a confident, continuous line. Either way, both options integrate cleanly with 4 Everdeck® decking and cladding so the whole exterior reads as one system.

Ultra Fascia Board Colours

Ash Grey Board on a transparent board

Ash Grey

A cool, architectural grey that reads crisp in strong light. It pairs naturally with concrete, steel, and pale façades, adding definition without visual weight. Use it to modernise brick or plaster, or to create contrast against warm cladding tones. In hot regions it reflects heat better than darker shades, which helps edges stay comfortable to touch on exposed elevations.
Redwood boards on a transparent background

Redwood

Warm, reddish-brown tones bring depth and a subtle highlight to neutral walls. Redwood softens glass and metal and anchors light paving, giving screens and gates a grounded presence. It’s a strong choice where you want the fascia band to be part of the composition rather than disappear, especially on north- and west-facing façades that benefit from a richer line.
Walnut boards on a transparent background

Walnut

A deep, classic brown that reads uniform and tidy across long runs. Walnut complements earthy palettes, stone, and darker window frames, tying together mixed materials on contemporary homes and hospitality projects. Choose it when you want a continuous perimeter that feels deliberate and finished without calling attention to joints or fixings.
Ipe wood board on a transparent background

IPE

Rich, wood-tinted depth with a subtle, straight grain that reads premium without feeling glossy. IPE anchors light façades and pale paving, pairing especially well with charcoal window frames and black steel. Use it where you want a pronounced, high-end band on long runs or tall elevations; the darker tone sharpens outlines and hides joints for a continuous, engineered look.

Maple boards on transparent background

Maple

Light, warm beige that brightens shaded façades and softens hard materials. Maple sits comfortably against white plaster, off-form concrete, and light stone, keeping edges visually open while reflecting more heat than deeper colours. It’s a smart choice for sun-exposed gates, upper-level trims, and coastal sites where you want a clean, modern line that doesn’t feel heavy.

Sandstone board on transparent background

Sandstone

Earthy, sun-baked neutral with a touch of warmth that ties landscaping, timber accents, and textured plaster together. Sandstone lends a natural, architectural calm to screens and façade bands, especially on mid-tone walls. It balances dark roofs and frames, reduces visual contrast on wide spans, and delivers a cohesive perimeter where you want the finish to feel integrated rather than accented.

Style Options

Standard Profile

A slim fascia band that finishes edges, trims, and small features with precision. It’s the right scale for anywhere you want a neat, controlled line that hides cut ends and closes transitions cleanly.

Dimensions 10mm x 70mm x 2900mm

Wide Profile

A bolder stripe for taller spans and long elevations. Fewer visible joins and a larger face create an intentional, architectural band that holds its straightness over distance and reads clearly from the street. Use it above ground floor lines, across parapets, or to unify mixed cladding zones without adding bulk.

Dimensions 15mm x 138mm x 2900mm

Single-story modern building with fascia boards and natural-toned siding blending with its surroundings.

About 4 Everdeck® Ultra Fascia Boards

Ultra Fascia is a finishing system, not just a trim. Each piece is engineered as a dense, fourth-generation composite with a refined wood-look surface, sized to resolve edges, close transitions, and introduce disciplined lines across façades and outdoor features. The material resists the swelling, checking, and surface breakdown that push timber fascias into constant maintenance. Profiles are calibrated for proportion: a slimmer band when you want definition without visual weight; a wider face when you’re spanning height, reducing joins, or creating a deliberate architectural stripe.

Key Features

  • Profile Choice with Purpose: Two profiles serve distinct design and build needs. Use the Standard band to finish smaller details where a fine line keeps the focus on the primary surface. Choose the Wide face for tall runs or long horizontals to minimise butt joins and keep elevations calm and continuous.
  • Tidy Edge Protection: Ultra Fascia closes exposed transitions so water has fewer places to linger and finishes don’t fray at the edges. Clean lines, fewer dirt traps, and a consistently sharp outline from corner to corner.
  • Colour Stability: Formulated for long-term outdoor use, the surface maintains its tone and texture through seasons of sun and rain. That predictability lets you coordinate confidently with adjacent plaster, stone, glass, or composite elements without budgeting for early repaints.
  • Built for Exposed Applications: Ultra Fascia is specified for places that see weather, touch, and traffic. It keeps its shape and finish where softwoods and painted trims struggle.

Free Quote, Guarantee & Brochure

Choosing 4 Everdeck® Ultra Fascia Boards is a long-term decision about finish quality and edge protection. We back that decision with clear pricing support, a strong product guarantee, and detailed guidance so you can specify confidently, order accurately, and install cleanly.
10 year guarantee badge.

Get a Free Quote

Share your drawings or site dimensions and note where you’ll use Standard vs Wide profiles. We’ll return an itemised take-off with profile lengths, suggested join locations to minimise offcuts, and fixing recommendations for your substrate. The quote clarifies coverage, colour choice, and lead times so ordering is straightforward and waste is reduced.
20 year warranty badge.

20-Year Guarantee

Ultra Fascia is covered by a 20-year guarantee. When installed to our guidance, the composite maintains its integrity and its finish under South African conditions. It’s assurance that edges stay straight, transitions remain tidy, and the surface keeps its tone without recurring repaint cycles.
request-a-brochure icon

Request a Brochure

Review the range in detail before you build. The brochure includes profile drawings, installation notes for vertical and horizontal runs, movement and clearance allowances, and colour swatches to coordinate with adjacent cladding or decking. It’s a practical reference for architects, installers, and owners aligning on finish and scope.
Get Free Quote
Request a Brochure

Frequently Asked Questions

What are Fascia Boards used for?

Fascia Boards act as a protective, finishing band wherever an exterior needs a neat, durable edge. They close off exposed transitions on façades, frame privacy screens and gates, and create tidy breaks between materials. The profiles are designed to read as a crisp trim line while shielding vulnerable edges from weather and wear.

No. Fascia is a finishing edge or band; cladding covers larger wall areas. Ultra Fascia is ideal where you need a durable perimeter or feature strip rather than full-surface coverage. It also pairs well with cladding when you want a defined transition between materials.
Ultra Fascia is backed by a 20-year guarantee when installed to guidance. This is long-term assurance that material integrity and finish will hold up under local conditions.
No. The boards are manufactured with colour-stable finishes intended to be left as-is, which removes the need for coating and keeps maintenance minimal.
Use Standard (10 × 70 × 2900 mm) where you’re trimming smaller features, edging panels, or running a consistent band around gates and screens. Choose Wide (15 × 138 × 2900 mm) when you need a bolder visual line or longer coverage with fewer joins.
Ultra Fascia Boards use newer, fourth-generation composite technology for improved strength, colour stability, and weather resistance compared to the regular range. They also offer two profile options (Standard and Wide) for greater flexibility on different project scales, while maintaining the same low-maintenance, long-lasting performance that the standard fascia boards are known for.

Get A Brochure

Need more information, or just want to have a hard copy on hand? Fill out the form below and get a brochure in your inbox immediately.